Types of mechanical flotation machine flotation machine, inflatable flotation machine, flotation machine or hybrid inflatable flotation machine, gas precipitation flotation machine.Mechanical flotation machineMechanical flotation machine and stirring the pulp of the inflatable are achieved by a mechanical agitator, air flotation machine is outside theSelf priming flotation machines, pneumatic ...
Self priming pumps are necessary if a pump has to be located above the level of the liquid to be pumped. A self priming pump must be capable of evacuating air from the suction line, thereby drawing liquid into the pump. When this has been achieved, the pump can revert to its normal pumping mode.
The air released during deaeration is conveyed out of the machine through a special air chamber on the side so that the airflow does not prevent the foam entering from above . The new pump can be linked directly to the deinking machine, forming a clean and closed disposal system.
The machine has the features of horizontal configuration, self sucking air, self priming slurry, self return of middling foam etc, the ancillary equipment is not needed. Compare with type A flotation machine, energy consumption of single capacity type is saved by15% 25%, the use cycle the wearing parts is double extended.
The Self Priming Line exceeds the efficiency ratings of the competition by multiple efficiency points, without sacrificing lift capability. This improvement translates into energy cost savings over the life of the pump. In addition to being focused on efficiency, Cornell Pump is also known for its innovative features.
The aeration and agitation of the slurry are completed by the impeller and mechanical agitation device of the flotation machine. It belongs to the external gas self priming flotation machine, generally the upper gas suction type, that is, air inhaled near the mechanical stirring device in the lower part of the flotation tank.